Difference between pages "Networkwishlist" and "Drill Press 1"

From ENTS
(Difference between pages)
Jump to: navigation, search
m
 
 
Line 1: Line 1:
 
+
{{Template:EquipmentPage |owner=ENTS |model=CanWood CWD 11-150 |doesitwork=Works |contact=Raphael B. |where=Basement |certification=No |hackable=No |value=$50 |itemphoto=LINK_TO_PHOTO}}<br>
 
+
== Specifications ==
 
+
Motor: 120V 2.4A<br>
* on the file server, make a new partition and mount it as /usr/pkgsrc/ . fetch the latest pkgsrc and put it there. make the other machines mount this /usr/pkgsrc instead of having a local repo
+
Speeds: 760, 1150, 1630, 2180, 3070 RPM<br>
+
== Equipment Settings ==
* create a new partition on the file server, not on the OS drive, using 100GB or so. create a new folder for each machine n the network, and move a complete mirror of that systems filesystem (use rsync plz) to these new folders.
+
Make sure to set the spindle speed to something appropriate for the size of drill bit and material you are drilling. For example, if you're using a 4" hole saw, don't use 3000 RPM. (Don't use a 4" hole saw on this drill press. It is not powerful enough. Use the Craftex in the garagae.) Ensure the belt is tensioned properly to prevent slippage.
 
+
== Known Issues ==
* create/install rc.d script to start/stop the BIRD BGP routing daemon on the router
+
The drive belt is severely frayed and needs immediate replacement before heavy use. If you -really- need to use this drill press, make sure the belt cover is closed. Please consider using a different drill press.
 
+
* create rc.d script to start/stop the anonet vpn connection (stopped by default), reference: [https://wiki.hamburg.ccc.de/ChaosVPN:Tims_NetBSD_chaosvpn_rc.d]
+
 
+
* fix this script to send signals other than "kill -9" first, then verify that the daemon is dead, if not, send kill -9.: [https://wiki.hamburg.ccc.de/ChaosVPN:Tims_NetBSD_chaosvpn_rc.d]
+
 
+
* fix my "block outgoing" tun0 firewall rules to work, ref: [https://wiki.hamburg.ccc.de/ChaosVPN:Tims_ipf_conf]
+
 
+
'''done'''* run this script to every machine, restart,  and verify ssh no longer times out: [https://wiki.hamburg.ccc.de/ChaosVPN:Tims_random_router_configs]
+
 
+
* fix the ugly routes hack script to properly parse routes and add them to default configs: [https://wiki.hamburg.ccc.de/ChaosVPN:Tims_netbsd_route_hack_attempt]
+
 
+
* setup CARP on the routers. its already compiled into the kernel, just needs configuration.
+
 
+
* using ALTQ set up bandwidth limits on the various router interfaces to limit them to no more than 1Mbps
+
 
+
* backup a copy of /usr and /etc to some offsite location, for each machine, and send a zipped copy to my gmail
+
 
+
* install DNSmasq on the router for the chaosvpn connection and configure it to use the chaosvpn DNS for their ip range, and the DN42 ip ranges for DN42
+
 
+
* log onto the cvpn "service lister" server and reduce the frequency of log backups in the cron entry. also make a cron entry to tar the folder once a week
+
 
+
'''done'''* set up x-forwarding (or confirm  it works) on debian machine
+
 
+
* figure out why routes sometimes drop (on win machine) when using second nic
+
 
+
'''done'''* find a switch to hook up to the cvpn side of the router
+
 
+
'''done'''* set up my http server to send 301 redirect messages to my blog for requests on www.440bx.net
+

Revision as of 18:29, 18 March 2014

Back to list of Equipment

LINK_TO_PHOTO

Contents

Label

Drill Press 1 http://ents.ca/index.php/Drill_Press_1

General

  • Owner/Loaner: ENTS
  • Make/Model: CanWood CWD 11-150
  • Usability: Works
  • Contact: Raphael B.
  • Where: Basement
  • Certification Needed: No
  • Hackable: No
  • Estimated Value: $50

How to Use

{{{Instructions}}}

Specifications

Motor: 120V 2.4A
Speeds: 760, 1150, 1630, 2180, 3070 RPM

Equipment Settings

Make sure to set the spindle speed to something appropriate for the size of drill bit and material you are drilling. For example, if you're using a 4" hole saw, don't use 3000 RPM. (Don't use a 4" hole saw on this drill press. It is not powerful enough. Use the Craftex in the garagae.) Ensure the belt is tensioned properly to prevent slippage.

Known Issues

The drive belt is severely frayed and needs immediate replacement before heavy use. If you -really- need to use this drill press, make sure the belt cover is closed. Please consider using a different drill press.

Personal tools
Namespaces

Variants
Actions
Navigation
Members
Toolbox