Networkwishlist

From ENTS
Revision as of 13:52, 8 January 2014 by Tim (Talk | contribs)

Jump to: navigation, search


task list


5 - log onto each machine and tell me what the ip addresses are for each interface and make a simple network map

5 - create/install rc.d script to start/stop the BIRD BGP routing daemon on the router

10 - create rc.d script to start/stop the anonet vpn connection (stopped by default), reference: [1]

10 - fix this script to send signals other than "kill -9" first, then verify that the daemon is dead, if not, send kill -9.: [2]

5 - fix my "block outgoing" tun0 firewall rules to work, ref: [3]

2 - run this script to every machine, restart, and verify ssh no longer times out: [4]

20 - fix the ugly routes hack script to properly parse routes and add them to default configs: [5]

20 - setup CARP on the routers. its already compiled into the kernel, just needs configuration.

10 - using ALTQ set up bandwidth limits on the various router interfaces to limit them to no more than 1Mbps

10 - backup a copy of /usr and /etc to some offsite location, for each machine, and send a zipped copy to my gmail

10 - install DNSmasq on the router for the chaosvpn connection and configure it to use the chaosvpn DNS for their ip range, and the DN42 ip ranges for DN42

10 - log onto the cvpn "service lister" server and reduce the frequency of log backups in the cron entry. also make a cron entry to tar the folder once a week

Personal tools
Namespaces

Variants
Actions
Navigation
Members
Toolbox