Difference between pages "Compound Mitre Saw" and "Networkwishlist"

From ENTS
(Difference between pages)
Jump to: navigation, search
m (Specifications)
 
 
Line 1: Line 1:
{{Template:EquipmentPage |owner=ENTS |model=Porter Cable 3807 |serial=SERIAL NUMBER |arrived=DATE |doesitwork=Works |contact=Kulps |where=Woodworking Bay (Garage) |certification=No |hackable=No |value=DOLLARS |itemphoto=[[File:mitresaw.png]]}}<br>
+
 
== Specifications ==
+
 
Motor: 120v 15A<br>
+
task list
Speed: 5,000 RPM<br>
+
---------
Blade Size: 10"<br>
+
 
Arbor Hole: 5/8"<br>
+
* log onto each machine and tell me what the ip addresses are for each interface and make a simple network map
Capacity: 45 degrees: 2x8 & 4x4, 90 degrees: 2x12<br>
+
 
 +
* renumber interfaces to something logical (and let me know the new ips). i will change port fowarding rules. then make sure everything still works.
 +
 
 +
* on the file server, make a new partition and mount it as /usr/pkgsrc/ . fetch the latest pkgsrc and put it there. make the other machines mount this /usr/pkgsrc instead of having a local repo
 +
 +
* create a new partition on the file server, not on the OS drive, using 100GB or so. create a new folder for each machine n the network, and move a complete mirror of that systems filesystem (use rsync plz) to these new folders.
 +
 
 +
* create/install rc.d script to start/stop the BIRD BGP routing daemon on the router
 +
 
 +
* create rc.d script to start/stop the anonet vpn connection (stopped by default), reference: [https://wiki.hamburg.ccc.de/ChaosVPN:Tims_NetBSD_chaosvpn_rc.d]
 +
 
 +
* fix this script to send signals other than "kill -9" first, then verify that the daemon is dead, if not, send kill -9.: [https://wiki.hamburg.ccc.de/ChaosVPN:Tims_NetBSD_chaosvpn_rc.d]
 +
 
 +
* fix my "block outgoing" tun0 firewall rules to work, ref: [https://wiki.hamburg.ccc.de/ChaosVPN:Tims_ipf_conf]
 +
 
 +
* run this script to every machine, restart,  and verify ssh no longer times out: [https://wiki.hamburg.ccc.de/ChaosVPN:Tims_random_router_configs]
 +
 
 +
* fix the ugly routes hack script to properly parse routes and add them to default configs: [https://wiki.hamburg.ccc.de/ChaosVPN:Tims_netbsd_route_hack_attempt]
 +
 
 +
* setup CARP on the routers. its already compiled into the kernel, just needs configuration.
 +
 
 +
* using ALTQ set up bandwidth limits on the various router interfaces to limit them to no more than 1Mbps
 +
 
 +
* backup a copy of /usr and /etc to some offsite location, for each machine, and send a zipped copy to my gmail
 +
 
 +
* install DNSmasq on the router for the chaosvpn connection and configure it to use the chaosvpn DNS for their ip range, and the DN42 ip ranges for DN42
 +
 
 +
* log onto the cvpn "service lister" server and reduce the frequency of log backups in the cron entry. also make a cron entry to tar the folder once a week
 +
 
 +
 
 +
* set up x-forwarding (or confirm  it works) on sun machine
 +
 
 +
'''done'''* find a switch to hook up to the cvpn side of the router

Revision as of 17:52, 23 February 2014


task list


  • log onto each machine and tell me what the ip addresses are for each interface and make a simple network map
  • renumber interfaces to something logical (and let me know the new ips). i will change port fowarding rules. then make sure everything still works.
  • on the file server, make a new partition and mount it as /usr/pkgsrc/ . fetch the latest pkgsrc and put it there. make the other machines mount this /usr/pkgsrc instead of having a local repo
  • create a new partition on the file server, not on the OS drive, using 100GB or so. create a new folder for each machine n the network, and move a complete mirror of that systems filesystem (use rsync plz) to these new folders.
  • create/install rc.d script to start/stop the BIRD BGP routing daemon on the router
  • create rc.d script to start/stop the anonet vpn connection (stopped by default), reference: [1]
  • fix this script to send signals other than "kill -9" first, then verify that the daemon is dead, if not, send kill -9.: [2]
  • fix my "block outgoing" tun0 firewall rules to work, ref: [3]
  • run this script to every machine, restart, and verify ssh no longer times out: [4]
  • fix the ugly routes hack script to properly parse routes and add them to default configs: [5]
  • setup CARP on the routers. its already compiled into the kernel, just needs configuration.
  • using ALTQ set up bandwidth limits on the various router interfaces to limit them to no more than 1Mbps
  • backup a copy of /usr and /etc to some offsite location, for each machine, and send a zipped copy to my gmail
  • install DNSmasq on the router for the chaosvpn connection and configure it to use the chaosvpn DNS for their ip range, and the DN42 ip ranges for DN42
  • log onto the cvpn "service lister" server and reduce the frequency of log backups in the cron entry. also make a cron entry to tar the folder once a week


  • set up x-forwarding (or confirm it works) on sun machine

done* find a switch to hook up to the cvpn side of the router

Personal tools
Namespaces

Variants
Actions
Navigation
Members
Toolbox