Drill Press 4

From ENTS
Revision as of 18:08, 18 March 2014 by Orcinus (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Back to list of Equipment

KC-110C.jpg

Contents

Label

Drill Press 4 http://ents.ca/index.php/Drill_Press_4

General

  • Owner/Loaner: ENTS
  • Make/Model: King Canada KC-110C
  • Usability: Working
  • Contact: Raphael B.
  • Where: Garage
  • Certification Needed: No
  • Hackable: No
  • Estimated Value: $150

Instructions

{{{Instructions}}}

Specifications

Voltage: 120 V
Amperage: 3.2 A
Swing: 10"
Quill Stroke: 2-3/8"
5 Speeds: 570-3050 RPM
Table Size: 7-3/4 x 7-3/4"
Spindle Taper: JT33
Chuck Capacity: 1/2"
Dual-laser guide

Equipment Settings

Make sure to set the spindle speed to something appropriate for the size of drill bit and material you are drilling. For example, if you're using a 4" hole saw, don't use 3000 RPM.
The laser guide in every drill press I have ever used is more than useless. Do not rely on it.

Personal tools
Namespaces

Variants
Actions
Navigation
Members
Toolbox