Difference between revisions of "Drill Press 1"

From ENTS
Jump to: navigation, search
m
m
 
Line 9: Line 9:
 
Make sure to set the spindle speed to something appropriate for the size of drill bit and material you are drilling. For example, if you're using a 4" hole saw, don't use 3000 RPM. (Don't use a 4" hole saw on this drill press. It is not powerful enough. Use the Craftex in the garage.) Ensure the belt is tensioned properly to prevent slippage.
 
Make sure to set the spindle speed to something appropriate for the size of drill bit and material you are drilling. For example, if you're using a 4" hole saw, don't use 3000 RPM. (Don't use a 4" hole saw on this drill press. It is not powerful enough. Use the Craftex in the garage.) Ensure the belt is tensioned properly to prevent slippage.
 
== Known Issues ==
 
== Known Issues ==
The drive belt is severely frayed and needs immediate replacement before heavy use. If you -really- need to use this drill press, make sure the belt cover is closed. Please consider using a different drill press.
+
The drive belt is severely frayed and needs immediate replacement before heavy use. If you -really- need to use this drill press, make sure the belt cover is closed. Please consider using a different drill press. We have four.

Latest revision as of 18:44, 18 March 2014

Back to list of Equipment

LINK_TO_PHOTO

Contents

[edit] Label

Drill Press 1 http://ents.ca/index.php/Drill_Press_1

[edit] General

  • Owner/Loaner: ENTS
  • Make/Model: CanWood CWD 11-150
  • Usability: Works
  • Contact: Raphael B.
  • Where: Basement
  • Certification Needed: No
  • Hackable: No
  • Estimated Value: $50

[edit] Instructions

{{{Instructions}}}

[edit] Specifications

Motor: 120V 2.4A
Speeds: 760, 1150, 1630, 2180, 3070 RPM
Swing: 8"
Table size: 6 1/4"
Quill stroke: 2"

[edit] Equipment Settings

Make sure to set the spindle speed to something appropriate for the size of drill bit and material you are drilling. For example, if you're using a 4" hole saw, don't use 3000 RPM. (Don't use a 4" hole saw on this drill press. It is not powerful enough. Use the Craftex in the garage.) Ensure the belt is tensioned properly to prevent slippage.

[edit] Known Issues

The drive belt is severely frayed and needs immediate replacement before heavy use. If you -really- need to use this drill press, make sure the belt cover is closed. Please consider using a different drill press. We have four.

Personal tools
Namespaces

Variants
Actions
Navigation
Members
Toolbox